Ghost Shadow Lights are designed to be installed on the bottom of the door panel, projecting the mercedes logo on to the ground when the car door is opened.
Note: Ghost Shadow Lights run off of a standard 12v power source, therefor can be installed anywhere a 12v power source is available.
Installation is simple usually taking under an hour. The effect produced by these Ghost Shadow Lights is unique, and very cool!
FULL PREVIEW OF AVAILABLE LOGOS AT BOTTOM OF PAGE.
1. Make sure the position for installing, It can be installed on the coaming and chassis or other right position; The best projection distance is 30mm for the projection light.
2. Fixed the stand of the projection light on the Car with a screwdriver.
3. Adjust the lamp holder to the best position.Tighten the fixed-screw at the bottom of the light cup.
4. Connect the power cord.
1. Environment friendly and power saving.
2. Durable and non-fading brilliant beams.
3. Elegant / Durable Casing.
4. Power Cable Length: Light for Power cord: 2.0 Meters
1. Voltage: DC9-24V
2. Decorative lights
4. Philips 3W led chip
5. Working temperature: -40°C-105°C
6. Dimension: L7*2.8W cm
2x Ghost Shadow Lights (of your choice) With Wiring
1x 28 MM Hole Saw